Format Fire Safe Light FP Notice D'utilisation Et De Montage page 10

OPERATING AND MOUNTING INSTRUCTIONS
FORMAT Fire Safe Light FP
2 SAFETY INSTRUCTIONS
2.1 Notes on safe operation
• The safe cabinet must be secured against tilting. We recommend that you always
anchor the cabinet.
• When closing the cabinet door, make absolutely sure that there are no limbs
between the cabinet door and the cabinet body. Otherwise there is a risk of crushing
of trapped limbs.
• Before closing the cabinet door, make sure that the locking bolts are retracted.
Extended locking bolts bump against the cabinet body when the door is closed, causing
the locking mechanism to become damaged and malfunction.
• Keep the numerical code for the electronic lock in a safe place outside the
EN
safe cabinet! Change the factory settings of the numerical code and the fingerprint
sensor as described in section 3.4.
3 OPERATION
3.1 General information
The electronic lock can be opened by either a 6-digit numerical code or via
a fingerprint sensor. In the delivery state, the lock can be opened via the factory
code 123456 or via any fingerprint. A beep sound is emitted with every keystroke.
Lock functions
• Open and close via numerical code or fingerprint sensor
• Changing the numerical code and fingerprint
(a maximum of 30 fingerprints can be programmed)
Input
• With 6-digit numerical code
• With registered fingerprint
• When programming and checking the numerical code
or the fingerprint, the door must always be open!
LED-Right
Figure 1: Keypad
10
Fingerprint sensor LED border
of the fingerprint sensor
Socket
for battery box
LED-Error
Handle
(turnable)
Keypad
Programming button
on the bottom of the door
Figure 2: open door
Battery compartment
inside of the door