Publicité
Les langues disponibles
Les langues disponibles
Care and Cleaning
First, unplug the power cord plug from the wall outlet.
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
If the surface is particularly dirty after cleaning up the dust, soak a soft, lint-free cloth in diluted, mild liquid
dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water), and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry
cloth of the same type until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid
contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the
surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in diluted, mild liquid dish soap and then wring the cloth dry.
Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of
the cabinet surface may be adversely affected or the coating may peel off.
Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water
to which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the
surface coating.
Note: If using a chemically-treated cloth, follow the instructions supplied with the cloth.
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-
term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off
any dust from the cloth before use.
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
Do not dunk the 3D Eyewear in liquid such as water when cleaning.
Avoid storing the 3D Eyewear in hot or highly humid locations.
As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.
Wipe the plug with a dry cloth at regular intervals.
Note: Moisture and dust can lead to fire or electrical shock.
The main unit is equipped with a cooling fan on the upper part of the back side. To remove dust or other
foreign materials adhering to the fan, vacuum it attaching lightly the opening of the suction nozzle of a
vacuum cleaner to the vent holes.
* Be extremely careful not to damage the display panel or other parts.
If a message appears even after cleaning and then turning on, contact your dealer or service center.
26
Display panel
Cabinet
Pedestal
3D Eyewear
Power cord plug
Back panel (Cooling fan)
Publicité
