Publicité
Les langues disponibles
Les langues disponibles
Print Setting
Setting All Files Together (One Print for
Each)
After performing steps 1-2 (
3
Select [ALL1].
Select
Set
4
Select [EXECUTE].
Select
Set
8 To exit the screen
Press FUNCTION.
8 To confi rm DPOF settings
In step 3, move the set lever to ¡ / ¢ to
select [CHECK SETTINGS], then press
down.
•
If necessary, change the number of
prints for the desired fi le by following
steps 4 and 5. (
8 To reset DPOF settings
1) In step 3, move the set lever to ¡ / ¢ to
select [RESET], then press down.
2) Move the set lever to ¡ / ¢ to select
[EXECUTE], then press down.
38
– # mode only
pg. 37)
ALL1
EXECUTE
CANCEL
SELECT
SET
pg. 37)
(Continued)
Direct Printing with PictBridge Printer
If your printer is compatible with PictBridge,
still images can be printed easily by
connecting the camera directly to the printer
with the USB cable. DPOF setting can also be
used. (
pg. 37)
Preparation:
Set the power/mode switch to OFF.
DC
Connector
AC Adapter
PictBridge
Printer
1
Set the power/mode switch to ON.
MODE
ON
OFF
2
Select [DIRECT PRINT].
Select
Set
USB
Connector
To AC Outlet
USB Cable
USB Connector
PLAYBACK ON PC
CONNECT TO DEVICE
CREATE DVD
BACK UP
DIRECT PRINT
SELECT
SET
QUIT
DIRECT PRINT
SELECTED PRINT
DPOF PRINT
CANCEL
SELECT
SET
Publicité
