Publicité
Step 12
Carefully stand your unit upright in its fi nal location. We recommend using the SAFETY STRAP for added stability.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR into a wall stud. If you prefer to fasten the SAFETY
å
STRAP to a wall stud, go to your local hardware store for proper hardware.
INSTALLATION INSTRUCTIONS:
å
1. Insert the SAFETY DRYWALL ANCHOR through the WASHER and the end of the SAFETY STRAP.
2. Using a Phillips screwdriver or a hand drill, press the screw slightly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips through.
4. Turn the screw until it is fl ush against the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinning freely.
NOTE: Before moving your unit to a diff erent location, unscrew the SAFETY DRYWALL ANCHOR from your wall. The
å
nylon sheath will remain behind your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
Page 16
15 lbs.
25 lbs.
25 lbs.
30 lbs.
30 lbs.
40 lbs.
424122
Washer
Safety
drywall
anchor
Safety strap
97
www.sauder.com/services
Publicité
