LENCO BMC-090 V2 Mode D'emploi page 9

the slider switch, with this switch it is not possible to adjust the volume
of the microphone and music separately. If you want to adjust the
volume of the music so that you hear the microphone better, you can do
this by long pressing the Previous song button (to decrease the volume),
to increase the volume, long press the Next song button. Make sure the
music switch is set to maximum.
Troubleshooting
The power light is
not ON
The microphone has
no sound.
The microphone has
no echo.
The sound has
noise.
The music is no
sound.
Technical Specification
⚫
Name: Portable Wireless Microphone Bluetooth Speaker with
holder
⚫
Item NO.:Lenco BMC-090
⚫
Source Input: micro SD card/USB/BT/Flashing Light/LINE-OUT
⚫
Input: DC5V; 500mA
⚫
Output Power: 5W*1
⚫
Bluetooth version: V5.0
⚫
Wireless frequency: 2402-2480MHz
⚫
Product size: 80*74*277mm
⚫
Weight: 407.6g
⚫
LED power: 800mw
⚫
Distortion: <1%
⚫
Battery capacity: 1200mAh
⚫
Material: ABS
⚫
Charging Time: About 4 hours
⚫
Playing Time: About 8 hours
⚫
(The playing time depends on volume and LED)
⚫
Transmission distance: about 10m
⚫
Audio format SD/USB MP3
⚫
Maximum USB stick capacity 64GB
1. Guarantee
Commaxx B.V. offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the warranty
period) you should contact your local dealer.
Please check that the microphone is charged
Please turn power on and adjust the volume
control on the microphone up.
Please slide the echo control on the
microphone up, please do not put the speaker
on the table under echo opening condition
Please confirm whether environmental
interference.
Please adjust the volume of your phone or slide
the volume control on the microphone up
9