LENCO BMC-090 V2 Mode D'emploi page 8

pair the microphones with your smartphone or tablet.
To disconnect the microphones, long press the LED light button (7) on
one of the units or insert a micro SD card or USB stick.
To connect again, you just need to long press the LED light button on one
of the units.
Micro SD card mode
1. Turn on Microphone, Insert the micro SD card preloaded with
songs, you will hear "SD card mode"from the speaker. Speaker will
automatically start playing songs from the SD Card.
2. To go to next song: Short press the
3. To go to previous song: Short press the
4. To Pause the Track: Short press the
5. To Play the Track: Short press the
USB stick mode
1. Insert the preloaded USB stick into the USB socket and the music
will automatically start playing.
2. To go to next song: Short press the
3. To go to previous song: Short press the
4. To Pause the Track: Short press the
5. To Play the Track: Short press the
Line-out mode
With the BMC-090, you can also play the music and microphone voice
on an external speaker or micro HiFi set. Just connect the AUX 3,5mm
cable to the AUX out of the BMC-090 and to the AUX in connector of the
external speaker or micro HiFi set. You can adjust the volume on the
BMC-090 for microphone and music.
Karaoke with holder
Make sure the speaker is in pairing mode, put your mobile phone on the
holder (the phone is more stable in the holder without a phone case).
You can choose favorite song to karaoke, then you can watch lyric on the
holder while you're singing.
Adjustment by karaoke
The volume of the microphone and music can be adjusted by means of
button.
button.
button.
button.
button.
button.
button.
button.
8