Pre-Installation
1
Remove the freezer door
WARNING: Unplug the refrigerator from its electrical
outlet. Empty all door shelves.
□
Remove the top hole cap and the top hinge cover, then
unscrew screws and remove the top hinge. Keep the
screws to reuse.
□
Lift the freezer door up and away from the appliance. Set
the door on a non-scratching surface with the outside up.
A
NOTICE: When removing the top hinge, watch for shim between the
bottom of the hinge and the top of the case that may stick to the
case. Do not lose.
NOTICE: When removing the door, watch for washer between the
center hinge pin and the bottom of the freezer door that may stick to
the door. Do not lose.
Part
Description
A
Top hole cap
B
Top hinge cover
C
Top hinge
D
Middle hinge
2
Remove the fresh food door
□
Unscrew screws of middle hinge, remove the hinge, hole
caps on the other side then lift the refrigerator door up and
away from your refrigerator. Save the screws to reuse.
□
Lift the fresh food door up and off the bottom hinge. Set the
door outside-up on a nonscratching surface.
B
C
NOTICE: Some models have a shim between the center hinge and
the case that may stick to the case. Do not lose. Also save the
washes for the center hinge screws for future use.
Quantity
9
Please contact 1-855-847-7264 for further assistance.
1
1
1
1
D
HOMEDEPOT.COM