Philips PM2522 Manuel D'instructions page 11

ИГ. Accessories
ПІ-І.
11-2.
РМ 2522
SUPPLIED AS PART OF THE EQUIPMENT
Set of measuring leads with test pins PM 9260
3-pole mains cable
Manual
OPTIONALLY AVAILABLE
EHT probe PM 9246 (Fig. 4, page 40)
The HT probe PM 9246 is suitable for measuring direct voltages up to 30 kV.
The PM 9246 may be used for measuring instruments with an input impedance of 100 MQ, 10 MQ
or 1.2 MQ (selectable).
TECHNICAL DATA
Maximum voltage
Attenuation
Input impedance
Accuracy
Note:
30 kV
1000 x
600 МО + 5%
+ 3% for instruments input impedance of 10 MQ and 1000 MQ
+ 5% for instruments input impedance of 1.2 MQ
Pay attention to safe earth connections.
Frequency range
Straight line within 5%
Maximum deviation
Voltage ranges
Max. voltage a.c.
Max. voltage d.c.
Input capacitance
T-piece
Frequency range
Impedance
Standing wave ratio
PM 9210
100 kHz ... 1 GHz
100 kHz ... 6 MHz
3 dB
ГОО caa WOW
30 V
200 V
2 pF
optional
HF probe PM 9210 (Fig. 1, page 40) Accessory set for HF probe type PM 9212
PM 9210 + PM 9212
100 kHz... 1 GHz
100 kHz ... 6 MHz
3,5 dB
MV 22.2200
200 V
500 V
2 pF
ТОО КИ E2 (€lnk2
50 Q
1.25 at 700 MHz;
With 1.15 at 1 GHz