Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE USING AIR HYDRAULIC JACK
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR SAFETY FOOTWEAR WITH PROTECTIVE TOE CAPS
ALWAYS WEAR MECHANICALLY RESISTANT PROTECTIVE GLOVES
The above-mentioned personal protective equipment refers to the use of the jack in normal
working environments. If any hazardous situations are shown following specific surveys,
it must be supplemented with such equipment as described in the risk assessment
document, in compliance with current standards concerning safety in the workplace.
TECHNICAL DATA
MAXMUM CAPACITY
MINIMUM PLATE HEIGHT
MAXIMUM PLATE HEIGHT
HYDRAULIC JACK LENGTH
HANDLE LENGTH
MAXIMUM HYDRAULIC JACK WIDTH
OPERATING TEMPERATURE
WEIGHT
Assembly
The handle is divided into two parts; join the two parts by means of the automatic coupling device; fix
the T handle with the screw supplied with the jack. Fit the handle into the socket; tighten the screw, in
order to prevent it from being accidentally removed during use.
Before operating the jack, any accumulated air can be removed from the system. Pull the handle up and
turn it anticlockwise. Keep the handle in this position and pump the jack several times to ensure
internal lubrication and bleed the accumulated air from the system.
8
2t
75 mm
500 mm
960 mm
1200 mm
370 mm
-10°C +50°C
40 kg
EN
I
Publicité
