Publicité
Les langues disponibles
Les langues disponibles
Put the chimney on the cooker hood. Fix the lower chimney
bracket on the wall by 2 screws (4mm x30mm).
Then pulling out the upper chimney upwards to the target
height. Adjust to reach the height required.
Fix the upper chimney on the upper chimney bracket by 2
screws (4x8mm). Then fix the upper chimney bracket on the
wall. Before fixing the bracket on the wall, you can decide the
upper chimney bracket fixing holes for installation.
Warning: For safety reason, please use only the same size of
fixing or mounting screw which are recommended in this
instruction manual.
Warning: Failure to install the screws or fixing device in
accordance with these instructions may result in electrical
hazards.
EN-13
Publicité
