Publicité
Les langues disponibles
Les langues disponibles
After hanging the hood on the bracket, remove the grease
filters, mark 2 holes inside the hood for safety screws. After
marking, remove the hood, drill two holes and insert 2 wall
plugs and finally fix the safety screws with 2 screws
(ST4x30mm).
7.Place the plastic duct on the cooker hood.
8.The lower chimney bracket is used to fix the upper decorative
chimney and lower decorative chimney.
Use 2pcs 4x8mm screws to attach lower chimney and lower
chimney bracket together. Put the lower chimney on the cooker
hood and mark the location of lower chimney bracket fixing holes on
the wall.
Noted:
Do not fasten screws too much, make sure upper
decorative chimney can be telescopically adjusted after assembled.
Upper decorative
chimney (Inner)
Lower Chimney
bracket
Lower decorative
chimney (Outer)
EN-12
provided with an
adhesive tape&a
plastic string to fix
the aluminium pipe.
Publicité
