Beper P203PAN004 Mode D'emploi page 11

Quartz Heater Use instructions
Warning: some parts of the appliance can get really hot du-
ring operation, it is necessary to pay extreme attention in
the presence of children or vulnerable persons.
Carefully read this manual before operating the appliance. Do not
use the appliance near bath tubs, showers, pools or other water
basins.
Warning: to avoid overheating, do not cover the appliance.
Do not place the appliance immediately below a wall socket-outlet.
Keep inflammable objects and materials (such as furniture,
cushions, blankets, paper, cloths, curtains, etc.) at least 1 meter
away from the appliance.
Do not leave the appliance operating unattended: make sure the
appliance is off, and disconnect it from the wall socket.
Warning: the appliance is not equipped with a device to con-
trol the room temperature. Do not use the appliance in small
rooms, when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision
is provided.
Product description Fig. A
1. Operation and power setting knob
2. Folding base
3. Tip-over switch
Operation
Place the appliance of a flat, dry and stable surface, and connect it to the wall socket.
Turn the device on by rotating the knob clockwise, and place it on the desired setting:
1 – only one heating element turns on, the selected power option is 400W
2 – both heating elements turn on, the appliance operates at max power (800W)
To turn the appliance off, place the knob on 0.
Note: the appliance is equipped with a tip-over switch, which cuts the power out in case of accidental
falling or when the base is lifted from the ground.
Cleaning and maintenance
The appliance does not require particular maintenance.
Before carrying out any cleaning operation, make sure that the appliance is off, unplugged from wall socket
and completely cooled off.
Clean the outer surface with a soft, slightly dampened cloth; dry thoroughly.
Warning: do not immerse the appliance in water or other liquids.
11
EN