Ricatech TAB10-07 Mode D'emploi page 6

All manuals and user guides at all-guides.com
Power monitoring and charging the batteries
The battery charge symbol in on the status bar indicates
the charging status of the batteries.
If the power goes down , the device shuts itself off automatically. If less
power is shown , use the power adapter to charge the device.
The charging time for the battery is approximately four hours .
Screen lock
If the device is not used for specified time or the „Power‟ button
is pressed briefly, the screen is switched off and display lock
is activated.
By pressing the „Power‟ button briefly the screen will be reactivated. For
unlocking the screen move the „Lock‟ button in the specified direction.
Connecting to the computer and data transfer
This Tablet is equipped with a High-Speed USB2.0 Interface.
After you connect the device to a computer, it appears in
the status display .
Pull the status bar down and press „USB Connection‟ to activate
the USB Memory. When using the device for data transfer,
you cannot access the Micro SD/TF Card from the Tablet!