Clarion BLT370 Manuel D'installation Et Mode D'emploi page 26

7. TROUBLESHOOTING
24
1EN_OM_Receiver BLT370.indd 24
All manuals and user guides at all-guides.com
Problem
The power of
Transceiver unit does
not turn on
The red or purple LED
lights up all the time.
Blue LED lights up all
the time. Transceiver
is not responding.
Cannot pair the car
handsfree with the
phone
Unable to auto connect
with phone upon power
up
BLT370
Cause
Fuse is blown.
Incorrect wiring.
Power-up failure
The device may not be
start upon power on.
The Transceiver has
malfunctioned due to
some conflicts such as
multiple pairing at the
same time.
The Bluetooth function
®
in your phone is off or
car handsfree is off.
Bluetooth function is is
®
disabled in your phone.
Multiple re-connection
mode is off. The auto
connection may not be
successful if there is no
Bluetooth link detection
®
for the first and only one
re-connection attempt.
Description
Replace with a fuse of
the same amperage
(2A) in the LC box. If
the fuse blows again,
consult your store of
purchase.
Consult your store of
purchase.
1. Power off and on the
device until the blue
LED blinks correctly.
2. Press the reset button.
Power off and on the
device until the blue LED
blinks correctly.
The Bluetooth function
®
in your phone must be
set to Automatic or On.
Your phone should be
inside the car during the
pairing procedure. The car
handsfree must be on.
The Bluetooth function in
®
your phone must be set to
Automatic or ON.
Turn on multiple re-
connection mode and
restart the Transceiver.
Manually reconnect via
your phone.
4/5/07 2:14:35 PM