Publicité
Les langues disponibles
Les langues disponibles
20. MAINTENANCE
Always disconnect the charging station from the power supply and read the
manual before performing maintenance or fixing a malfunction.
Only products approved by the supplier can be used to repair or replace components.
Repairs and replacements should always be carried out by a certified specialist.
Maintenance should always comply with and be carried out in accordance with NEN3140
and NEN50110 low voltage EU regulations.
Check the charging station for leaks.
Check the connection of the main power cable and ensure a tight connection, see point 19.3
Treat any damage to the charging station with anti-corrosion paint.
21. TRANSPORTATION AND STORAGE
Transport the charging station (technical core) upright and prevent the paint from being
damaged, as this could cause rust.
The covers may be transported in various ways as long as they are protected from damage.
Preferably store the charging station in a dry, non-humid space.
When hoisting the charging station into position, there are 2 securing holes for lifting eyes
on the top of each corner of the charging station. The lifting eyes can be removed after
fitting. To ensure a safe work setting, only a certified fitter may hoist the charging station.
22. RESOLVING PROBLEMS
If the charging station malfunctions, immediately contact the Ecotap® helpdesk, open
24/7 (telephone number: +31 (0)411 745 020) or a certified technician who possesses the
necessary measuring and en testing equipment with auto-simulation.
NOTE!
All work on and modifications to the charging station must comply with at least NEN1010.
23. www.ecotap.nl
24-01-23
Publicité
