Publicité
Les langues disponibles
Les langues disponibles
<Safety protection function>:When the indoor ambient temperature Th exceeds 50°C
under the standby or working state,all out puts are turned off,the buzzer prompts 10
long beeps,the digital screen displays"FF"and flash es at 1 Hz for 75 seconds.As long
as there is protection,even if the ambient temperature is less than 50°C,the running
or operation can not be resumed,and the operation can only be performed after the
power is turned off and on again.
<Shut down>:Under the working state,press the
power
key" "on the control panel
to enter the standby state,unplug the power cord,wait for the whole machine to
cool,and place the heater stably.
[Note]
To use the machine for the first time or to re-insert the socket, please pay attention
to check whether the plug and the socket are fitted well.
<Inspection method>
Insert the power plug into the socket and start for use; after about half an hour, turn
off and pull out the plug. Check whether the plug pins are hot; replace the socket if
so (more than about 50 °C) to avoid burning the plug or even causing a fire caused
by overheating of the socket due to poor contact.
display windor
control panel
5
Publicité
