Publicité
Les langues disponibles
Les langues disponibles
English
Fig. K
6
Fig. L
15
Clearing a Jammed Fastener (Fig. M–P)
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove air supply before
making any adjustments or removing/installing
attachments or accessories. An accidental
actuation can cause injury.
If a nail becomes jammed in the nose, keep the tool pointed
away from you and follow these instructions to clear:
1. Disconnect the tool from the air supply and engage
trigger lock.
2. Depress pusher release
8
way to the front of the magazine.
3. Depress nail stop
5
and slide fasteners
from magazine.
4. If nail is jammed between the driver and nose force
driver blade back to the top using a 1/4" (6.4 mm)
punch and hammer. When the nail is released it will fall
free or can be removed using pliers.
5. If nail still can not be removed, remove the magazine:
a. Remove screws
.
16
b. Remove magazine.
c. Remove bent nail.
d. Reassemble in reverse order.
8
and slide pusher
9
all the
13
nOTE: Should nails continue to jam frequently in nose, have
tool serviced by an authorized service center.
Fig. M
9
Fig. N
13
5
Fig. O
8
Publicité
