ohmex HET 4530 COLOR Manuel D'utilisation page 114

EN
- Automatic heating
Press the "IC" button to turn the function on or off.
When on, the fireplace can automatically switch to heating mode based on the set
temperature to that of the ambient temperature.
During a timed start, heating can start before the set time.
- Date and time settings
1. Press the "DATE/TIME" button and then the " " or "
2. Press the "DATE/TIME" button again and then press "+" or "-" to set the hour.
3. Press the "DATE/TIME" button again and then press "+" or "-" to set the minutes.
4. Press "OK" to confirm.
- Temperature settings
The default temperature is 20°C.
1. Press "+" or "-" on the remote control to set the desired temperature between 15°C
and 30°C.
The set temperature only concerns normal operations. It does not apply to timed
operations.
The set temperature must be higher than the ambient temperature to permit
heating.
- "Timer" function settings
Features:
There are up to 10 items for timer settings.
Each setting item has a date, start time and stop time.
The maximum duration of each setting is 23 hours and 50 minutes.
Each setting can be by day or for the entire week.
The date set in each represents the equipment start date.
If the off time falls on the day after the start time, the date need not be set but
simply set the off time (example: start "Monday at 2 PM" - stop at 1 PM - means it will
stop on Tuesday).
110
USE
HET 4530 COLOR
" button to select the day.