ohmex HET 4530 COLOR Manuel D'utilisation page 113

HET 4530 COLOR
Using the remote control
How to work
1. Turn on equipment power
2. Turn the appliance on by pressing the switch (6) on "I" (ON) ; the appliance emits a
"beep" indicating that it's electrically powered.
3. Press the "ON / OFF" button on the remote control.
When pressing one of the remote control buttons it's necessary to wait a
moment before the signal is received from received by the appliance. Do not
continuously press the buttons.
- Button "900W" (10b)
- Press the button once to set the minimum heat function (900W).
- Press the button a second time to stop the function.
- Button "1800W" (10c)
- Press the button once to set the maximum heat function (1800W).
- Press the button a second time to stop the function.
- Button "FLAME COLOR" (10d)
- Press the button to start "flame color" mode.
- Press the "FLAME COLOR" button again to change the color among the 7 colors
available.
10d
10
USE
10a
10b
10c
EN
109