Door Reversibility - AEG S75358KG38 Notice D'utilisation

18
Installation
On delivery the carbon filter is in a plastic bag to
maintain it's duration and characteristics. The fil-
ter should be placed behind the flap before the
appliance is turned on.
1. Open the flap cover (1)
2. Remove the filter from the plastic bag
3. Insert the filter in the slot found in the back
of the flap cover (2)
4. Close the flap cover
During operation, always keep the air ventilation
flap closed.
The filter should be handled carefully so frag-
ments do not loosen from the surface.

Door reversibility

WARNING!
Before carrying out any operations, remove the plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
1. Open the doors. Unscrew the middle
hinge (m2). Remove the plastic spacer
(m1).
2. Remove the spacer (m6) and move to
the other side of the hinge pivot (m5).
3. Remove the doors.
4. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
5. Fit the pin of the middle hinge (m5) in-
to the left-hand hole of the lower door.
2
1
m1
m2
m6
m5
m4
m3