Publicité
Les langues disponibles
Les langues disponibles
Up to
6
stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a station in
the preset memory.
© Select a band and frequency (steps Q, © and © on the previous
page).
(2)
Press and hold the Spectrum Analyzer display
|fllNE|
for more than
2
seconds until the preset number blinks.
(
3
) press
or
/[/\] or [ v] to select a preset number (
1
-
6
).
(4) Press and hold
(preset) for more than
2
seconds to memo-
Preset number
• The display blinks once, and a re¬
ceiving station is saved in the
memory.
Note.
Spectrum Analyzer display
|P.SET
• Frequency setting can be performed even after selecting a preset num¬
ber.
_
|
Entering numbers directly on the remote control unit
© Select a band and frequency (step 0> © and © on the previous
page).
(2) Press and hold [1] to 16] for more than 2 seconds to memorize.
Auto Preset
Memory (APM)
Automatically save rela¬
tively strong stations in
the preset memory.
© Select a band (steps © and © on the
Scanning:
previous page).
(2) Press and hold
[BAND]
(APM) for
more than
2
seconds.
• The
6
strongest available stations will be automatically saved in the
memory under preset number
1
to
6.
• Once set, the preset stations are sequentially scanned for 5 seconds
each. (Scanning)
• press
m*.
or
'wr
/[/\] or [v] for the broadcast you want to listen
to.
(Press [1] to [6] on the remote control unit.)
• Existing saved stations are overwritten with new stations after following this procedure.
Preset Station
Calling
© Select a band (steps O and © on the previous page).
(2) Press the Spectrum Analyzer display |
TUNE
| to show
|P.SET|
(preset).
© Press
or
a]
or [v] to select the preset number for tuning
in the preset station.
(Press [1] to [
6
] on the remote control unit.)
CQ-DF802U
Publicité
