Inventum VTM301W Mode D'emploi page 12

3
using the fan
Place the fan on a flat, stable surface. Insert the plug in a wall socket. Press the required position to switch on the fan. The position
switch has the following options:
0 = off
1 = slow
2 = medium
3 = fast
To switch off the fan, press [ 0 ].
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement.
If you want to change the wind to an upward or downward direction, you can simply move the fan head upwards or downwards.
position buttons
4
cleaning and maintenance
Before cleaning the fan, you must switch it off [ 0 ] and remove the plug from the socket.
• Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
• If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the fan in water or any other liquid.
12
• English
Push in the oscillation pen to allow the fan to
oscillate.
If you want to stop the oscillation, simply pull out
the pen.
oscillation pen
manual tilting