Publicité
Les langues disponibles
Les langues disponibles
The "Dual" Burner
Separate regulation of the inner and outer rings (in practical terms, a dual burner controlled by a single
knob), offers flexible use thanks to the possibility to light either the inner flame only or the whole burner
(inner and outer flames at the same time).
Lighting and Using the Burner
Stand the pan on the burner before lighting.
Although it is controlled by a single knob, the "DUAL" burner can be used in two different ways.
•
Using the complete burner:
Starting from the Off position ■, you must first press the knob, simultaneously turning it
o
counter-clockwise, until the indicator points to the maximum delivery position obtaining the
maximum flow capacity of both flames.
o
When the flames are lit, keep the knob pressed for a few seconds, until the device automatically
keeps the burner lit.
o
It is now possible to regulate the intensity of the flame by turning the knob counter-clockwise
(from the maximum flow capacity position of the inner and outer flames) to the maximum flow
capacity of the inner flame and the minimum of the outer flame.
To turn off the burner, turn the knob clockwise, realigning the indicator with the ■ Off symbol.
o
•
Using the inner flame only:
o
After lighting the burner and regulating the inner flame to maximum flow capacity and the
outer flame to minimum flow capacity as described above, turn the knob counter-clockwise until
it clicks once. The inner flame is now at maximum flow capacity while the outer flame is turned
off.
o
Continue turning counter-clockwise to regulate the inner flame to the minimum flow capacity.
•
Turning off:
To turn off the burner, turn the knob clockwise, realigning the indicator with the ■ Off symbol.
o
Once the "DUAL" burner is operating in either of the two modes described, it is possible to swap
o
from one mode to the other by simply pressing and turning the knob to the position required.
All manuals and user guides at all-guides.com
17
Publicité
