OHAUS ST300D-B Manuel D'instructions page 16

EN-12
4.4.2
Recalling from memory
 Press and hold button-
when the current measurement reaches endpoint.
 Press button-
indicates which result is being displayed. Press button-
measurement screen.
4.4.3
Clearing the memory
Continue pressing button-
appears. Then press button-
press button-
memory.
or button-
or button-
, CLr blinks. Press button-
to return to the measurement mode without deleting all the data in the
STARTER 300D Portable DO Meter
for 3 seconds to recall the stored values from memory
to scroll through the stored results. R01 to R30
to scroll through the stored results until MRCL
to go back to the
again to confirm the deletion or