Satco NUVO LIGHTING 65-083 Instructions D'installation

INSTALLATION INSTRUCTIONS
PRECAUTIONS:
Before beginning installation or service, disconnect the power by turning off the circuit breaker. Turning the power off by using the light switch
is not suffi cient to prevent electrical shock. This fl oodlight is for outdoor use and should not be used in areas of limited ventilation
or high ambient temperature. All work should be performed by a qualifi ed electrician.
IMPORTANT: This product must be installed in accordance with the applicable installation code by a person familiar with the construction
and operation of the product and the hazards involved.
INSTALLATION:
This fl ood light is supplied with a knuckle bracket for surface mounting -- make sure fi xture is securely mounted. The knuckle
mounting bracket off ers many positions to install. To make a selection, remove the positioning screw, loosen knuckle bolts,
and rotate the knuckle to the desired angle. Reinsert the positioning screw and tighten.
NOTE:
The LED driver in this unit operates in the range of 120 to 277 VAC. No additional tap wires are necessary.
Simply splice the power leads to the branch circuit – black to black (hot), white to white (neutral), and green to green (ground).
TROUBLE SHOOTING CHECKLIST:
If this fi xture fails to operate properly, check to make sure:
1. The fi xture is wired correctly.
2. The fi xture is grounded correct.
3. The line voltage at the fi xture is correct.
©Copyright 2015 Satco Products, Inc. 10/15
Model 65-083
LED Landscape Flood
Satco Products, Inc.,
Brentwood, NY 11717