Publicité
Les langues disponibles
Les langues disponibles
(Hardwiring to Power cont.)
and crimp into place (fuse tap is not included in the kit and will vary by vehicle type).
Connect the fuse tap to the fuse slot you have chosen.
Note: You will need to determine which type of fuse tap is needed to complete the
power wiring. Variations include ATO, Mini, Low Profile and Micro2. Consult the vehicle
owner's manual to determine which fuse is needed for your installation.
5 Ground the power supply. Most vehicle will have a factory grounding point. Slip the
power supply's negative lead (black) under the metal bolt on the grounding point and
tighten into place.
6 Test the booster power. With the power supply hardwiring completed and inside and
outside antennas in place attach the power supply to the booster. Turn the vehicle
ignition on and make sure the booster power light turns on. Then turn the ignition off to
make sure the booster powers off.
15
ENGLISH
Publicité
