Publicité
Les langues disponibles
Les langues disponibles
Hardwiring to Power Option
This kit includes a Hardwire power option. Hardwire instructions are below. Use the
steps below as a general template for wiring the power. There are multiple options for
wiring and steps will vary depending on the vehicle type.
1 Locate the vehicle fuse box. The fuse box location will vary by vehicle, refer to the
vehicle's owner's manual.
2 Route the power cable from the booster to the fuse box.
3 Determine which fuse to hardwire the power to. Find an open fuse slot that is ignition-
switched, if there are no open fuse slots tied to the vehicle ignition power can be
attached to an existing fuse. Wiring to an ignition-switched fuse will ensure the booster
is not drawing power when the vehicle is off. Refer to the vehicle owner's manual for
information about the fuses.
Note: You can use a circuit tester to test if the fuse is constant or ignition-switched.
A constant fuse will stay on when the vehicle is off, and an ignition-switched fuse will
have power when the vehicle is on but no power when it is off.
4 Connect the power supply. Once you have determined a fuse slot to use connect the
positive lead on the power cable to the included in-line fuse then attach to a fuse tap
14
ENGLISH
Publicité
