Publicité
Les langues disponibles
Les langues disponibles
EN
Shredding Material Manually
On rare occasions, it is possible that the sensors do not detect the material inserted.
1
Press and hold the FWD button.
Î The material is then drawn in and shredded.
2
Release the FWD button.
Switching the Shredder Off
Switch the shredder off when you no longer need to use it.
1
Switch the device off by pressing the On/Off button.
Î The shredder is switched off.
2
Disconnect the power plug from the power socket if the shredder will not be used for a longer
period of time.
Sleep Mode
If the shredder remains switched on but is not operated for 30 minutes, it automatically enters
Sleep mode. The status indicator on the front of the shredder goes out. The status indicator on
the top of the shredder dims.
Proceed as follows to deactivate Sleep mode:
1
Feed material to be shredded in the centre of the insertion slot.
Î The shredder is ready to operate again.
Alternatively, press the FWD or REV key on the shredder to deactivate Sleep mode.
- 16 -
Publicité
