Publicité
Les langues disponibles
Les langues disponibles
GREASE BUCKET
1. Hang grease bucket from tube as shown in Fig 6.
ASH CUP
1. Install Ash Cup as shown in Fig 6. Never use
grill without Ash Cup in place.
ASH CUP
INSTALL DEFLECTOR AND DRIP TRAY
1. Install the Heat Deflector and Drip Tray as
shown in Fig 7 and Fig 8.
DRIP TRAY
HEAT DEFLECTOR
WARMING RACK AND COOKING GRATE
1. Install the Warming Rack and Cooking Grate as
shown in Fig 9.
GREASE BUCKET
FIG. 6
DRIP TRAY
CLEANOUT PORT CLOSED
HEAT DEFLECTOR
FIG. 7
FIG. 8
PG24-1
WARMING RACK
PG24-70 (2)
COOKING GRATE
FIG. 9
CLEAN-OUT PORT KNOB
1. Clean-out Port knob must be pushed in when
grill is on. Make sure pullout lock is pushed
down and locks the knob to prevent inadvertent
opening of the clean-out port. See Fig 10.
2. Lift pullout lock and pull clean-out port knob to
empty ash into ash cup. See Fig 11
3. See instructions for burner clean-out.
BURNER CLEAN-OUT
Before each use the burner should be cleaned out
by lifting the pullout lock and pulling the clean-out
port knob on the right side of the grill to open the
burner clean-out. This will allow the ash from
previous use to fall into the cup under the grill.
The cup should be removed and emptied and then
reinstalled before each use.
Never Operate the Pellet grill without the ash
cup in place.
Make sure the burner clean-out port is closed
and locked before starting the grill.
Never open the burner clean-out port when the
grill is hot.
FIG. 10
CLEANOUT PORT CLOSED
FIG. 11
CLEANOUT PORT OPEN
DANGER
C
C
Publicité
