Axis Communications C8033 Instructions D'installation page 13

English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO TICE TICE
NO NO TICE
Indicates a situation which, if not avoided, could
result in damage to property.
Other message levels
Important
Indicates significant information which is essential
for the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety instructions
DANGER
Risk of electric shock. All cables shall be de-energized
before installing or performing maintenance on the
product.
CAUTION
Be careful of sharp metal edges. Use cut-resistant
gloves during installation.
CAUTION
Risk of injury. The product has moving parts and may
move unexpectedly when power is supplied. Always
disconnect the power supply before installing or
performing maintenance on the product and keep at
a safe distance when it is powered.
NO TICE TICE
NO NO TICE
•
The Axis product shall be used in compliance
with local laws and regulations.
•
To use the Axis product outdoors, or in similar
environments, it shall be installed in an approved
outdoor housing.
•
Store the Axis product in a dry and ventilated
environment.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
•
Avoid exposing the Axis product to shocks or
heavy pressure.
•
Avoid exposing the Axis product to vibration.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Do not install the product on vibrating poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a clean cloth dampened with pure water for
cleaning.
•
Use only accessories that comply with the
technical specification of your product. These
can be provided by Axis or a third party. Axis
recommends using Axis power source equipment
compatible with your product.
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
•
Do not point the camera lens toward the sun or
other high-intensity radiation sources because
this could cause damage to the camera.
Transportation
NO NO NO TICE TICE TICE
•
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Battery
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
WARNING
•
Risk of explosion if the battery is incorrectly
replaced.
•
Replace only with an identical battery or a
battery which is recommended by Axis.
•
Dispose of used batteries according to local
regulations or the battery manufacturer's
instructions.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT