Publicité
Les langues disponibles
Les langues disponibles
CLEARANCES AND DIMENSIONS
· Dimensions that are shown in Figure 1 must be used. Given dimensions provide minimum
clearance. Locate the electrical outlet in the shaded area in the upper left-hand corner of the
cutout.
· Contact surface must be solid and level. Pay special attention to the floor on which the
Microwave Drawer will sit. The floor of the opening should be constructed of plywood strong
enough to support the weight of the oven (approx. 100 lbs.).
· Check location where the Microwave Drawer will be installed for proper electrical supply.
· Your oven can be built into a cabinet or wall by itself or under a gas or electric wall oven.
· Be sure that the clearance of the floor between the wall oven and the microwave drawer is a
minimum of 2 inches.
· The microwave interior will easily accommodate a 9" x 13" oblong dish or a bag of microwave
popcorn.
MICROWAVE DRAWER MEASUREMENTS
Figure 1
9
Publicité
