Publicité
Les langues disponibles
Les langues disponibles
DRAWER INSTALLATION
Figure 5
1. Place the drawer adjacent to the wall or cabinet opening. Plug the power supply cord into the electrical outlet.
2. Carefully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall.
3. Slide the drawer until the mounting flange is
flush with the face of the cabinet. See Figure
5.
4. Open the drawer. Using the 4 holes on
the drawer as a template, predrill the cabinet
using a 1/16" bit. See Figure 5.
5. Secure the drawer with the 4 screws supplied.
See Figure 6.
MODEL AND SERIAL NUMBER LOCATION
The nameplate includes the model and serial number. Open the Microwave Drawer fully. The label is on the back
wall of the microwave cavity facing up from the flat surface.
Figure 6
12
Publicité
