Be Cool BC-B2500B Mode D'emploi page 247

Make sure that the product is operated in an easily accessible
place so that you can quickly disconnect the unit from the PV
panels and the Micro inverter in case of emergency.
Carefully read the instructions of the devices you want to
connect to the storage unit.
Note that if your units are not ready to plug in and electrical
installation is required, electrical installations should only be
carried out by qualified personnel. Electrical work can be life-
threatening and improper installation can result in serious
injury or even death. Please contact a qualified electrician to
have electrical work carried out.
Do not crush the connection cable or drag it over sharp edges
or hot surfaces. Do not use the connection cable for carrying.
If the connections or cables of this unit are damaged, do not
continue to use the unit to avoid danger.
To reduce the risk of damage to the power plug and cable, pull
on the plug and not the cable when disconnecting the product.
Do not use the product beyond its rated capacity. Overloading
the outputs beyond the rated value may result in a risk of fire
or injury to persons.
Do not operate the product with a damaged cable or plug or a
damaged output cable.
Do not use the product or accessories if they are damaged or
altered. Damaged or altered batteries may exhibit
S. 247