Publicité
Les langues disponibles
Les langues disponibles
EN
ENGLISH
12. Environmental Protection
The generated grinding dust may contain harm-
ful substances. Dispose appropriately.
Observe national regulations on environmentally
compatible disposal and on the recycling of
disused machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste!
In accordance with European Directive 2002/
96/EC relating to electrical and electronic
waste and implementation of national law,
used electrical tools must be collected sepa-
rately and disposed of in an
environmentally friendly manner at recycling
centres.
13. Technical Specifications
Explanatory notes on the specifications on
page 4. Changes due to technological pro-
gress reserved.
= max. diameter of the accessory
= max. permitted thickness of the
clamping shank on accessory when
using 2-hole nut (13)
= max. permitted thickness of clam-
ping shank on accessory when using
«Quick» clamping nut (1)
= spindle thread
= length of the grinding spindle
= no-load speed (maximum speed)
= no-load speed (adjustable)
= rated input power
= power output
= weight without mains cable Mea-
sured values determined in conformity
with EN 60745.
Machine in protection class II
AC Power
* Machines with the designation WE... : En-
ergy-rich, high-frequency interference can
cause fluctuations in speed. The fluctuations
disappear, however, as soon as the interfe-
rence fades away.
12
The technical specifications quoted are subject
to tolerances (in compliance with the relevant
valid standards).
Emission values
These values make it possible to assess
emissions from the power tool and to compare
different power tools. Depending on the ope-
rating conditions, the condition of the power
tool or the accessories, the actual load may
be higher or lower. For assessment purposes,
please allow for breaks and periods when the
load is lower. Based on the adjusted estimates,
arrange protective measures for the user e.g.
organisational measures. Vibration total value
(vector sum of three directions) determined in
accordance with EN 60745 :
= Vibration emission value
(surface grinding)
= Vibration emission value
(sanding with sanding plate)
= Uncertainty (vibration) Typical
A-effective perceived sound levels :
= Sound-pressure level
= Acoustic power level
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Publicité
