PURE H270SB Mode D'emploi page 16

Setup options
Options available in digital radio
Digital radio antenna setting
You can specify the type of digital radio antenna you
are connecting to Highway. The available options
are 'ACTIVE' and 'PASSIVE'. See page 19 for
more information.
L-band settings
You can specify whether or not Highway tunes in to
radio stations that broadcast on L-band.
To enable or disable the L-band setting:
1. Press and hold the DISP button on the front
panel until 'CLOCK' is displayed on the screen.
2. Press the or buttons to scroll to 'DAB
LBND'.
3. Turn and press the VOLUME dial to toggle the
L-band function 'ON' or 'OFF'.
14
Options available in FM radio
Local seeking
You can use the local seeking function so that
Highway only tunes into radio stations with a strong
signal.
To enable or disable the local seeking function:
1. Press and hold the DISP button on the front
panel until 'CLOCK' is displayed on the screen.
2. Use the button to scroll to 'DX/LO'.
3. Turn and press the VOLUME dial to select
either 'LOCAL' (enable) or 'DX' (disable).
Note: The number of radio stations that can be
received will decrease when local seeking function
is enabled.
Radio Data System
Highway has a built-in Radio Data System (RDS)
decoder system that supports broadcast stations
transmitting RDS data.
RDS settings
AF function
If you are listening to an FM radio station and the
signal starts to weaken, the AF function will try to
search and automatically retune Highway to the
same radio station on an alternative frequency. This
setting is ON by default.
1. Press and hold the DISP button on the front
panel until 'CLOCK' is displayed on the screen.
2. Press the or buttons to scroll to 'AF'.
3. Turn the VOLUME dial to select 'ON' or 'OFF'.
When the AF function is enabled, the AF indicator
will appear on the display.
Note: Digital to FM service following will not work
when the AF function is disabled.