Table des Matières

Publicité

This guide has been prepared for the final users of the automatism; the installer is required to deliver this gui-
de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-
tion to all the other users. These instructions must be carefully conserved and easily available for consultation
when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact
the installer regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop
using the automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by
qualified personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use
of the release mechanism and the location of the release keys.
All ADVANCE models have a release device that is activated by pulling the handle indicated in Fig. 7 down-
wards; at this point, the door is free to move if there are no other obstructions present. To restore the motor work
condition, move the handle upwards and move the door manually until the release runner is blocked again.
WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to
avoid any risk.
The only operation the user can and must do is to remove any obstacle hindering the door or ADVANCE ope-
rator travel range. Warning! Always disconnect the power supply whenever performing operations on the gate!
INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

ADVANCE RELEASE MECHANISM
CLEANING AND INSPECTIONS
DEA SYSTEM S.p.A.
Via Della Tecnica, 6 - 36013 PIOVENE ROCCHETTE (VI) - ITALY
tel: +39 0445 550789 - fax: +39 0445 550265
Internet: http:\\www.deasystem.com - E-mail: deasystem@deasystem.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Net724n

Table des Matières