Beta 1844 15-H05/SCK Mode D'emploi page 6

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR AUTOMATIC CABLE REEL MANUFACTURED
BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
- The automatic cable reel can be used for the following purposes:
• Power supply extension of lamps or sockets
- The automatic cable reel must not be used for the following operations:
• do not use under any conditions other than those specified in TECHNICAL DATA.
• the cable must not be used for hooking or dragging material
WORK AREA SAFETY
Danger over tripping over the cable.
Do not operate the automatic cable reel in environments containing potentially explosive atmospheres, because sparks
may be generated, which can ignite the dust or fumes.
Avoid contact between the cable and incandescent or hot parts.
Keep children and bystanders away from your workplace while operating the automatic cable reel. Distractions from
other people can cause you to lose control over the automatic cable reel while using it.
AUTOMATIC CABLE REEL SAFETY
- Install the cable reel by firmly fixing the revolving metal bracket to a wall or a stable structure, making sure that it can support
the load.
- Check that connection to the power supply mains is compatible with the information contained in TECHNICAL DATA.
- Do not bend, cut or tighten the cable. Keep the cable away from heat, chemicals and rotating parts.
- Immediately replace any damaged cable.
PERSONNEL SAFETY
- Stay alert; watch what you are doing. Do not use the cable reel while tired or under the influence of drugs, alcohol, or
medication.
- Make sure you are in a safe position, keeping a proper balance at all times. A safe working position and a proper body posture
enable better control of unexpected situations.
AUTOMATIC CABLE REEL USE AND CARE
- Do not overload the automatic cable reel, and always check it is free from defects.
- Always disconnect the automatic cable reel from the power supply mains before carrying out any jobs on the reel
- Store the cable reel out of the reach of children when not in use. Do not allow persons unfamiliar with these instructions to
operate the cable reel.
- Periodically check that the bracket is intact and properly secured to the wall or the supporting structure.
- Keep the cable reel clean, to allow for perfect winding.
- Do not modify the automatic cable reel. This can reduce the effectiveness of safety measures and increase operator risk.
- Have the automatic cable reel repaired only through a qualified repair person and only using original replacement parts.
- Pull the cable steadily, using the right amount of force, avoiding tugging it.
- Maintain a firm grip on the cable while winding it.
6
IT IS IMPORTANT TO READ THIS MANUAL THOROUGHLY BEFORE
USING THE AUTOMATIC CABLE REEL. FAILURE TO COMPLY WITH THE
SAFETY STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
EN I