Publicité
Les langues disponibles
Les langues disponibles
after connection of the inverter to the voltage source (e.g. a car battery), you may take
the inverter into operation.
• The inverter offers two mains sockets so that two consumers can be connected directly.
The combined power intake of the two consumers (see rating plates on the con-
sumer or in their operating instructions) must not exceed the output of the inverter.
• Switch the inverter on via the on/off switch (switch position "I").
If connected correctly, the "Power" LED will now light up and thus indicate correct operation
of the inverter. The two connected consumers are ready for operation.
• The "Fault" LED will light up at overload, overtemperature or undervoltage recognition.
• To switch off the inverter, put the on/off switch in the "O" position.
Using a USB output socket:
This connection may be used, e.g., to charge a smart phone or tablet computer.
The USB output socket supplies a voltage of 5 v/DC and a current of up to 500 mA. For
this, the inverter must be switched on ("Power" LED lit)
34
Publicité
