BTI BH 2-24 ME Notice Originale page 27

Symbol Meaning
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to the
shank end of the application tool
P Rated power input
1
E Impact energy per stroke accord-
ing to EPTA-Procedure 05/2009
n No-load speed
0
Ø Drilling diameter, max.
Concrete
Steel
Wood
Brickwork
Core bit
Weight according to
EPTA-Procedure 01/2003
Protection class
L Sound power level
wA
L Sound pressure level
pA
a Vibration total value
h
K Uncertainty
Delivery Scope
Rotary hammer, auxiliary handle and depth stop.
Application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in
our accessories program.
1 619 929 L29 • 7.8.12
Intended Use
The machine is intended for hammer drilling in con-
crete, bricks and masonry, as well as for light chisel-
ling work. It is also suitable for drilling without impact
in wood, metal, ceramics and plastic, as well as for
screwdriving.
Technical Data
The technical data of the machine are listed in the ta-
ble on page 110.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your power tool. The trade names of individual power
tools can vary.
Declaration of
Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
BTI Befestigungstechnik GmbH & Co. KG
D-74653 Ingelfingen
Jürgen Dietz
General Manager
BTI Befestigungstechnik GmbH & Co. KG
D-74653 Ingelfingen
Ingelfingen, 07.08.2012
Noise/Vibration Information
The measuring values of the machines are listed in the
Table on Page 110.
i.V. Günter Hub
Purchasing Manager
English | 27