WOLFF EF 135 - 230 V Traduction Du Mode D'emploi Original page 20

6.0 Troubleshooting
Fault Possible cause
The machine
Battery is empty
does not start
Higher exer- Cutting blade
tion of force
Machine auto- Overload protection
matically has been activa-
switches off ted
7.0 Disposal information
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into na-
tional right, power tools that are no longer
usable must be collected separately and
disposed of in an environmentally correct manner.
Subject to change without notice.
8.0 Guarantee
The guarantee period for new Wolff machines is one year
from the time of delivery/transfer to the customer, unless
another period applies pursuant to mandatory legal regu-
lations.
When making a claim under guarantee, the invoice and/or
proof of purchase must be provided.
All repairs covered by the guarantee must be carried out
by a Wolff service shop recognised by us. Repairs which
are carried out by the customer and/or improperly automa-
tically lead to a disentitlement from guarantee claims. The
same is true of improper operation and/or use.
Replacement of parts, accessories and other changes
to Wolff machines
Wolff machines provide users with a high degree of safety
and reliabiity. To maintain this, the condition of your Wolff
machine may not be changed from that on the date it was
delivered from the factory without observing the following
rules. These rules apply for the replacement of parts, the
addition of accessories and other technical changes.
•
Remedy
•
Charge battery on
station
Replace
cutting blade or
Machine after
a cooling time
•
turn back on
Original Wolff spare parts and Wolff accessories have
been specially tested for their safety and suitability for
Wolff machines.
We can not suffi ciently judge the safety and suitability
of spare parts and accessories which are not original
Wolff parts, and are thus unable to vouch for them.
•
We can not assume any liability for damages caused
as a result of improper work and/or violation of the
above terms and conditions.
All work done on your Wolff machine must be carried
out exclusively by a specialist workshop which
has suitably trained and experienced staff and the
working materials required. For this, we recommend
an authorised Wolff service shop.
In the event that parts are deliberately replaced, ac
cessories are deliberately added or other technical
changes are deliberately carried out, the customer
must. always consult an authorised Wolff service
shop or us, the manufacturer, before starting
the work.
We urgently recommend only using safety-che
cked original Wolff spare parts and original
Wolff accesso-ries which have been cleared by
us, the manufacturer. These spare parts and acces
sories can be purchased from your authorised Wolff
service shop, which will also be pleased to assemble
them for you properly.
To maintain operating reliability and avoid dama
ge, in the case of technical changes – of whatever
kind – our technical guidelines are to be observed in
every case. Please also contact us at any other time
if you have any questions about your Wolff machine.
EN
20