AIRFORCE Aspira Centrale Easy 80 Prescriptions De Montage Et Mode D'emploi page 69

These errors appear on the hob display.
Error code
Er20, Er22, Er31,
or display segments that
light up in sequence
Er 03
Er21
*
If the error persists, contact the authorised technical support centre specifying the
error code.
CLEANING AND MAINTENANCE FUNZIONAMENTO
HOB ERROR TABLE
Description
Touch control fault
Continuous activation of
one of the buttons, the
control switches off after
10 seconds.
Excessive tempera-
ture
Possible causes
Error detected in the
touch control
Liquid or pot on the con-
trol area
Appliance overheat-
ing
69 69
GB I
Solution
Contact technical sup-
port specifying the error
code.
Dry and clean the glass
or remove the pot from
the control area.
Let the appliance
cool down, if it does
not solve the issue,
contact technical sup-
port. *