Bosch BBP3775 Notice D'utilisation D'origine page 14

English – 12
Inserting the PowerTube battery (axial)
(see figure D)
D
(12)
(9)
(3)
(1)
(11)
In order for the battery to be inserted, the locking
mechanism (9) must be folded to the side. At this
point, the key (1) must not be inserted in the battery
lock (2).
❶ To insert the PowerTube battery, insert it into
the frame with the socket for the charging con-
nector (5) facing upwards until the battery clicks
into place.
❷ Close the locking mechanism (9), insert the
key (1) into the battery lock (2) and secure the
battery. Make sure that the safety hook (3) is
hooked in at the opening of the axial rail (11).
0 275 U07 3PX | (09.07.2021)
❸ Check that the battery is secure in all directions.
Always remove the key (1) from the lock (2) after
locking it. This prevents both the key from falling out
and the battery from being removed by unauthorized
third parties when the eBike is not in use.
Bosch eBike Systems