Publicité
Les langues disponibles
Les langues disponibles
CONNECTING THE WATER SUPPLY
When connecting the water supply, follow these guidelines:
•
Review the local plumbing codes before you install the unit.
•
The water pressure should be between 20 and 120 psi.
CAUTION
CA
CA
CA
CA
UTION
UTION
UTION
UTION
!
If you are using a filter system you will need to have at least 20 psi for 3 minutes every
15 minutes.
•
Make certain a SHUT-OFF VALVE is
installed in the 1/4 inch water supply line.
•
Connect sufficient tubing to the unit to allow
the unit to be moved for cleaning and
servicing. However, make certain that the
tubing is not pinched or damaged during
installation.
•
Electrolux recommends the use of copper
tubing for installation.
Water Supply Connection
13
WATER
CONNECTION
UL103_CO
Figure 7
Publicité
