Playing Content Of The Android Device On The Av Receiver-Wireless Link Mode - Kenwood KCA-WL100 Mode D'emploi

Operating a device using wireless connection Operating a device using wireless connection
Playing content of the Android device on the
AV receiver—Wireless Link mode
To play content stored on the Android device on the AV receiver
1
Turn on the AV receiver and select the HDMI input for the
source on the AV receiver connected with the adapter.
2
Switch the connection mode to "Wireless Link".
• If you cannot select the connection mode on the AV receiver,
perform the operation on the adapter. (Page 8)
• Once the connection is established between the Android
device and the adapter, you can also switch the connection
mode from the Android device. (Page 7)
• If the connection mode is "Wireless Link", go to step 3.
On the AV receiver:
Connection mode
6
3
Operate the Android device to connect the device with
"KCA-WL100_XXXXX (identification number)" via Wi-Fi.
• Enter the password if required (initial: "12345678").
4
Operate the Android device to start an application
compatible with UPnP (Universal Plug and Play), then
play the content.
• For applications compatible with UPnP, search on Google
Play.
The playback screen is displayed on the AV receiver.