Toshiba CANVIO SLIM HDTD310ES3DA Mode D'emploi page 4

Connecting the drive to your computer
1. Plug the USB 3.2 Gen 1 micro-B connector into the corresponding port of the drive itself.
Requires USB Type-A port.
NOTE
2. With your computer powered on and fully booted up, plug the USB Type-A connector into a USB Type-A port of
your computer.
< Windows PC >
Immediately,

the Power/Data indicator light will illuminate

the drive will power up

the drive should mount and a new drive icon should appear in "My Computer"
< Mac >
Immediately,

the Power/Data indicator light will illuminate

the drive will power up and is ready to use
User's Manual - CANVIO SLIM EN_4