SWAGTRON T580 Manuel D'utilisation page 19

STEP 3. While the SWAGTRON
holding the button down.
STEP 4. Wait an additional 6 seconds and you will hear a single beep. Release the POWER BUTTON and the front
LEDs will begin flashing.
STEP 5. Press the POWER BUTTON again to turn the SWAGTRON
STEP 6. Press the POWER BUTTON again to turn on your newly calibrated SWAGTRON
If the SWAGTRON is still not calibrated correctly, repeat step 1 to 6 or contact customer support for
®
additional assistance.
remains level, hold the POWER BUTTON down to turn on the unit and keep
®
off.
®
unit.
®
®
SWAGTRON T580 Hoverboard 19 English