Non-volatile appliance settings and compressor protection
In the event of a power outage, the appliance settings will not be reset.
When the power is restored, the appliance will operate with the same
settings as before the power outage. If the power is restored within less
than 5 minutes, the compressor will start with a delay. This prevents
damage to the compressor.
Elevated temperature alarm
If the temperature inside the freezer compartment is higher than –10°C
when you plug in the appliance to power, the freezer compartment tem-
perature will flash on the display. The temperature will stop flashing after
a few seconds or when you touch any sensor on the control panel.
Error Codes
Contact the service centre when E0, E1, E2, EH, EF or EC appears on the
display.
Child Lock
The appliance features a child lock safety device. The Child Lock func-
tion is especially useful when cleaning. The Child Lock function is
activated automatically 3 minutes after you last used the control panel
or opened or closed the door. Touch and hold the
sensor for 3
seconds to deactivate the Child Lock
NanoFresh*
Products stored in the refrigerator will stay fresh longer. This is how
the special carbon filter works.. The air in the refrigerator com-
partment
flowing
through
the
NanoFresh
filter,
is
continuous-
ly cleaned of compounds that accelerate the decomposition of food.
Additionally, the activated carbon contained in the filter absorbs unpleas-
ant odors. The function is still active.
- 25 -
*According to the model