Publicité
Les langues disponibles
Les langues disponibles
4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C (N class marked on the rating plate). If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected and it may not be possible to
obtain temperature between 5-20°C.
How to set temperature
.
•
"Power"
When the indicator light is on, the power for machine is on.
•
"
"
To show the temperature of the internal cooler.
•
"
"
Used to rise the temperature by 1°C.
•
"
"
Used to down the temperature by 1°C.
•
"
"
To control the inner light turn on/off.
Press this button, the light is on, and the light is not controlled by door. Press this button again, the
light is off, and the light is controlled by door.
NOTE: it will take 3 seconds for LED light completely went out after turning off the light.
•
"
"
To control this appliance turn on/off.
Press this button, the power is on and press this button with 3 seconds again, the power is off.
Note
• The temperature range can be set as low as 5°C or as high as 20°C to suit your specific storage
requirements.
• The acquiescence temperature setting is 12°C.
•
You can choose the desired temperature by using the
increases/decreases by 1°C with each button press. When the temperature setting reach the upper
limit 20ºC and lower limit 5ºC, the temperature setting will not increase or lower.
• If you want to know the actual temperature, please press
show actual temperature. After 5 seconds, it will show the setting temperature.
and
buttons. The temperature selected
or
for 3 seconds, display panel will
46
Publicité
