Avintage AVI24S2X Notice D'utilisation page 37

energy for the refrigerating appliances.
• Avoid locating the unit in moist areas.
• Keep the appliance away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may
also cause the appliances not to perform properly.
• Plug the wine cooler into an exclusive, properly installed-
grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized products
service center.
• To
ensure
recommendations given in the present manual.
• Unpack the appliance and visually check that it is not damaged.
Do not connect a damaged appliance. Inform your retailer or
point of sale of any damage. In such a case, keep the
packaging.
• It is recommended that the appliance be allowed to settle for at
least 24 hours before connecting the electrical power supply,
so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To
ensure sufficient
recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
recommendations.
• The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
proper electrical
ventilation,
condenser).
connection,
observe the
Observe the
follow the
installation
installation
37