Publicité
Les langues disponibles
Les langues disponibles
2 / INSTALLING YOUR APPLIANCE
EN
• ENVIRONMENTAL PROTECTION
— The cooker hood should be placed at a
distance of 5-50cm (
-20inch) from the
cooking surface for the best effect.
See Pic 1.
1. Drill four 8mm diameter holes in the
appropriate horizontal position on the solid
part of the wall according to the center
distance of the hanging hole on the back of
the hood. See pic 2.
2. Insert wall plugs into the holes that you
have drilled for the cooker hood body,
fasten 2 pcs support screw ST4*30 mm
2 * ST 4 m m * 3 0 m m
halfway in, leaving them 2 mm out of the
wall. See pic 2.
3. Hang the cooker hood onto the support
screws. Insert ST4*30 mm screws into the
safety holes and fully fasten it to ensure the
cooker hood is well xed. Note: The two
safety vents are positioned on the back
housing, with diameter of 6mm. See pic 3.
4. Install the carbon lter on the both sides
of the motor.
29
Publicité
